TPU Anti-Bonk; Table Stabilizer
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Attaches to wall, or table, with a main goal of reducing the table (bumping) bonking into the wall (while printing).
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 5
- Makes
- 0
- Views
- 59
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- Creative Commons — Attribution — Share Alike
I made this in 85A TPU with 5% infill and 2 shells, but I think that most TPU would work. When printing, my table bonks into the wall it is next to, hence the name 'Anti-Bonk'.
My table kept annoying me when it would smash into the wall, and no amount of pushing it up against the wall would reduce this;
I made 3 different sizes, each with a 6mm hole, Normal - Thinner - Thicker. I personally used the thinner one as that is what fit between my table/wall gap. I used a drywall screw I had laying around, but basically any screw with a head diameter of bigger than 6mm would work.
Please post your makes and leave a review if you get a chance :)