Tenstar PicoKey Slim Case
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Slim Case for Tenstar RP2350USB board. Must remove the JST style socket in order to fit into this case.
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 68
- Makes
- 1
- Views
- 383
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Share Alike
This case is for the Tenstar RP2350USB board with the JST style socket removed. It's a slimmed down version of the original model from https://www.thingiverse.com/thing:7213383. The two halves can be friction snapped together, but you could use super glue or a soldering iron if you desire a stronger connection.
This board is useful for making into a Picokey which is an open source alternative to Yubikey devices. Instructions found at https://www.picokeys.com/ and source code at https://github.com/polhenarejos/pico-fido2
Each half can be printed flat side down with no supports needed.