Mafell fence guide inlay
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
An addition to the Mafell fence guide milling groove - for whatever the groove may be
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 7
- Makes
- 0
- Views
- 75
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution
The standard fence guide of the Mafell Erika tables comes with a peculiar milling groove at both ends. In my case the groove is useless and prevents fixing the fence with a clamp at the end of the fence.
So I designed an insert with the same profile as the fence, which completes the fence with all the necessary T-slots.
The insert can be attached by only pressing it into the fence profile.
For your own design you can find models of the fence profile here
BTW - if anyone knows something about the milling groove and what it's meant for: Please tell me
Printing hints
The model is designed just for one side. For the second, just mirror a copy in your slicer.
I recommend strong materials for printing, because it is a subject to high mechanical stress. My parts for the tablesaw are usually printed from carbon- or glas-fibre reinforced nylon.