Domino - a Miniature Watercolour Palette
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Miniature watercolour palette that looks like a domino
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 30
- Makes
- 0
- Views
- 228
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Art & Designs
- License
- Creative Commons — Attribution — Share Alike
Inspiration
My wife bought me a wooden miniature palette which was awesome! But it was too big for a standard bulldog clips and as soon as I cleaned it with water the wood swelled and wouldn't close properly. As a maker I love designing things - thanks babe for the inspiration.
This design makes several improvements over the original palette:
It's a smaller footprint - It's slightly bigger than a standard domino
the mixing palette is bigger
the paint spots are bigger
A 1 inch bulldog clip holds it shut
it's made of a material that won't deform when washed in water
More kid safe - Magnets are made to be installed during printing and are covered
step, 3mf, stl and f3d files provided
Print settings
[Voron PIF]
Material - PLA, PETG, ABS or ASA
Infill Type - Grid, Gyroid, Honeycomb, Triangle or Cubic
Infill percentage - 40%
Layer Height - 0.2mm
Wall count - 4
Extrusion Width - 0.25mm
Top/Bottom layers - 5
Recommend a smaller nozzle (0.25mm) to make thin walls to hold the side magnets
BOM
10x 2x3mm N52 magnets
1ml white resin (UV or coloured epoxy)
1 inch bulldog clip
Slicing and Assembly
Use your slicer to pause to install 4x magnets to join the palettes horizontally (take care to align magnets so that they're facing N to the edge on one piece and S to the edge on the other piece).
Pause again before closing the top 6x magnets in (take care to make sure the magnets are N up on one piece and S up on the other).

Once printed make up 1 ml of white resin and carefully layer into the mixing palette. A toothpick helps to move it to the edges. Then leave to harden and you're done!