1 / 4
Domino - a Miniature Watercolour Palette — zdjęcie 1
1 / 4

Domino - a Miniature Watercolour Palette

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Miniature watercolour palette that looks like a domino

Ocena
0 / 5
Polubienia
6
Pobrania
30
Wydruki
0
Wyświetlenia
228
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Share Alike
Inspiration

My wife bought me a wooden miniature palette which was awesome! But it was too big for a standard bulldog clips and as soon as I cleaned it with water the wood swelled and wouldn't close properly. As a maker I love designing things - thanks babe for the inspiration.

This design makes several improvements over the original palette:

  • It's a smaller footprint - It's slightly bigger than a standard domino

  • the mixing palette is bigger

  • the paint spots are bigger

  • A 1 inch bulldog clip holds it shut

  • it's made of a material that won't deform when washed in water

  • More kid safe - Magnets are made to be installed during printing and are covered

step, 3mf, stl and f3d files provided

Print settings

[Voron PIF]

  • Material - PLA, PETG, ABS or ASA

  • Infill Type - Grid, Gyroid, Honeycomb, Triangle or Cubic

  • Infill percentage - 40%

  • Layer Height - 0.2mm

  • Wall count - 4

  • Extrusion Width - 0.25mm 

  • Top/Bottom layers - 5

Recommend a smaller nozzle (0.25mm) to make thin walls to hold the side magnets

BOM
  • 10x 2x3mm N52 magnets

  • 1ml white resin (UV or coloured epoxy)

  • 1 inch bulldog clip

Slicing and Assembly
  1. Use your slicer to pause to install 4x magnets to join the palettes horizontally (take care to align magnets so that they're facing N to the edge on one piece and S to the edge on the other piece).

  2. Pause again before closing the top 6x magnets in (take care to make sure the magnets are N up on one piece and S up on the other).


  3. Once printed make up 1 ml of white resin and carefully layer into the mixing palette. A toothpick helps to move it to the edges. Then leave to harden and you're done!

Tagi