1 / 1
Cuisinart EM-200 Espresso Machine Extended Steam Lever — image 1

Cuisinart EM-200 Espresso Machine Extended Steam Lever

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

The current lever is very difficult to turn, this lever slips right over the current one and adds the leverage needed…

Rating
0 / 5
Likes
0
Downloads
4
Makes
0
Views
26
Reviews
0

Updated at source:

Model information

Category
Kitchen
License
Creative Commons — Attribution

The current lever is very difficult to turn, this lever slips right over the current one and adds the leverage needed to turn on or off steam/water.

*Note the lever hole is asymmetric, it is larger on one end to slide further onto the current lever.

Installation:

First way: Press the lever on. It was designed for exact press fit onto the current lever. It should hold very well. If you are worried it will fall off, use epoxy like gorilla glue.

Second way (in addition to glue): I designed the part with pocket holes for M3 cap bolts. Press fit the lever on, mark the holes, remove lever, drill holes, replace lever, install bolts. Try to use shorter bolts, this should keep the lever in place.

I am currently using it as just press fitted on. It has been working well.

Thank!

Print Settings

Printer Brand:

Wanhao

Printer:

Wanhao Duplicator i3 V2

Rafts:

No

Supports:

No

Resolution:

.2mm

Infill:

50%+

Category: Kitchen & Dining

Tags