PVC Hardware for DIY Whoop Gates
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
3/4" PVC pipe adapters to make new variations of my gate setup
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 6
- Makes
- 0
- Views
- 56
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Attribution — Noncommercial
Whipped up some new mounts for DIY whoop gates. The one I'm stoked about is the T adapter. I made version that has a Print In Place mech for clamping. Just thread in the printed screw. When you import into orca or Bambu it will ask if you want to import as a single object with multiple parts. You'll want to click "yes". The screw you can then move around on build plate if you want but the main T should retain it's floating clamp.
Also made version that the mech drops in for printers with lower tolerance.
Made some new beefier tripod mounts with "feet" so they don't rock.
Next to make newer design on the gates themselves.
NO SUPPORTS REQUIRED; Done in PLA so might be tight with PETG or similar.
Like my Design?
BUYMEACOFFEE! :)