Apus 2 mount for Anthead
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A mount for the Apus 2 extruder with a Sherpa Mini bolt pattern, in a format that will work with the Anthead printhead
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 12
- Makes
- 0
- Views
- 71
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Voron Parts & Upgrades
- License
- Creative Commons — Public Domain
Picked up an APUS 2 extruder, but could not find any adapter to use it on my Voron steath changer
This mount is a 5mm thick plate, that bolts to the APUS 2, and allows you you bolt to the Anthead
The cut out in the rear allows wires from the tool head to route under the extruder
Beware, the SHCS that goes to the Anthead, has to be installed before you install the adapter on the Apus
Installation:
Insert two M3x10 SHCS into the adapter
Use M3x6 BHCS to attach the adapter to the APUS
Bolt on to the Anthead
Printed in Qidi ABS GF 25%
Standard Voron settings, .4mm forced line width
Should print well with any ABS or ASA, with no shrinkage
Optimized for .2mm layer height and .2mm initial layer