1 / 1
Mask Series Vol.1 – Stone Guardian (Wall Display Mask) — image 1

Mask Series Vol.1 – Stone Guardian (Wall Display Mask)

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

A carved stone guardian mask for wall display — bold sculpted planes, clean FDM print, looks great in matte PLA.

Rating
0 / 5
Likes
6
Downloads
12
Makes
0
Views
74
Reviews
0

Updated at source:

Model information

Category
Wall-mounted
License
Creative Commons — Attribution — Noncommercial

Part of Mask Series Vol.1: Warlords & Rituals — a set of display masks designed for strong silhouettes, crisp detail, and reliable FDM printing.

The Stone Guardian is inspired by ancient temple idols: heavy brow, chiseled planes, and cracked stone texture that reads brilliantly after printing. It’s designed as a standalone wall display mask (no frame), perfect for an office wall, games room, or streaming backdrop.

Print Notes (Bambu A1 / PLA)

  • Material: PLA (Matte PLA recommended for a real “stone” look)

  • Layer height: 0.20 mm (0.16 mm for a premium finish)

  • Walls: 4

  • Infill: 10–15% Gyroid

  • Supports:

    • Flat-backed wall version: usually No

    • If your model has deep undercuts: Tree supports only where needed

  • Brim: Optional (5–8mm) if edges lift

Wall Mounting

Choose one:

  • Add 2 rear mounting holes near the top (simple + secure)

  • Add a keyhole slot on the back (single screw)

  • Flat back can also work with Command strips (lightweight wall display)

Scaling

  • Best wall presence: 180–220mm wide

  • Smaller scales work, but the crack detail reads best above ~160mm

Finish / Paint Tips (Optional)

  • Matte stone colours look great (grey, charcoal, sandstone)

  • Quick upgrade: light dry-brush with a lighter grey to make the cracks pop

Tags