Vehicle Headrest Utility Hook
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Vehicle Headrest Utility Hook to hang anything from bags to hardhats.
- Rating
- 0 / 5
- Likes
- 14
- Downloads
- 146
- Makes
- 0
- Views
- 349
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Vehicles & Machines
- License
- Creative Commons — Attribution — Noncommercial
A utility hook designed to clip on to the headrest rails of your vehicle. Can be used to hang whatever you may want from bags to hardhats. Printed the one in pictures with Elegoo Rapid PETG and it does the trick. Image provided to show print recommended print orientation. I painted supports for the downward arch on mine though it may print fine without them. I also autogenerated Mouse Ears just to be sure.
Uploaded a Large and Small version, the Small being about 20% smaller than the Large. Both Large and Small version fit a headrest rail with a diameter of 13mm. I recommend measuring the extension length of your headrest to be sure it fits. I have the Large in the pictures and it's a snug fit in my F-150.
Recommended Print Settings:
Material - PETG or Better (it's going in a Vehicle that gets hot, print with that in mind and considering how much weight you plan to hang on it.)
Layer Height - 0.3mm (Printed with a 0.6 Nozzle to reduce time, if using 0.4 then use 0.2mm Layer Height)
Wall Loops - 4 (2 may be fine but I chose 4 to add extra strength)
Sparse Infill Density - 25% (I'd recommend no lower than 15%)
Top/Bottom Surface Pattern - Monotonic Line (My personal preference to leave smooth surfaces)
Support - Potentially Optional (I printed with tree support in the arch but it may be fine without it)
Brim/Mouse Ears - Optional (I printed with Mouse Ears to be sure.)
File provided as STEP so you can more easily make adjustments if you want to make a offset or remix to some capacity.