1 / 4
Spacer for QIDI X-Plus 4 Mainboard
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
To prevent the Mainboard from overheating, use this spacer
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 33
- Makes
- 0
- Views
- 267
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Public Domain
I recently had the problem, that the stepper drivers were overheating in the back of the QIDI X-Plus 4 when the chamber heater is at max and the buildplate at 110°C. This creates a lot of heat in the area around the mainboard, so I decided to push the mainboard a little away from the hot inside cover and closer to the cooling fan.
Furthermore, I insolated the back of the printer and the hope is, that the radiation is not getting into the area where the mainboard is located.
I would recommend PETG or ABS for this modification.