Vorwerk VR200 main brush transmission belt and pulley
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Replacement pulley and belt for the Kobolt vr200 main brush transmission gearbox.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 18
- Makes
- 0
- Views
- 127
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Attribution — Share Alike
Remark on the belt dimension
After mounting the belt you must have a very tight fit on the pulley otherwise the motor will skip teeth under load (guess how I know that).
With my robot, I ended up switching from the original 49 teeth belt, down to 48 teeth to get a proper tension.
The x2 belts are provided you have to test and pick the one that fits best for you.
Test manually and carefully and remember that every mistake ends up with the assembly/disassembly of the whole robot (which is no fun):
install the pulley and belt in the gearbox's bottom part
install the bottom part of the gearbox on the motor but screw it only partially
adjust belt's tension using the small leeway provided by the gearbox placement on the motor
screw completely the gearbox on the motor keeping the ideal belt tension
verify that while blocking the brush shaft (with a plier) and forcing manually the motor rotation (by rotating the black disc on its back) you can't get the motor to skip any tooth
finally close the top part of the gearbox with the x3 screws
Print settings
Tolerances and print quality are crucial to get a functional setup.
I ended up printing with a 0.25 nozzle to achieve a better fit/accuracy.
Pulley:
0.25 nozzle
PETG (maybe ABS or PC would be better)
0.15 layer height
seams position: random
infill 100%
Belt:
0.25 nozzle
TPU
0.1 layer height
seams position: random
infill 100%
"avoid crossing perimeters"
Other remark
To help further reduce the friction of the brush on the floor you can also consider this set of specific rollers: here.