2022 Kia Sorento Dash Mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I utilized the screw cover holes behind the infotainment screen to mount a generic monitor for our car seat camera.
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 16
- Makes
- 0
- Views
- 215
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution — Noncommercial
I utilized the screw cover holes behind the infotainment screen to mount a generic monitor for our car seat camera.
Assembly is simple for this one, just press and snap into place. It is a very snug fit, so it will take a bit of force, but I wanted it to be rather tight than loose.
I made mine out of Elegoo Rapid PETG with a 0.2 layer height, standing with no supports. We'll see how it fairs the summer.
I believe this could be adapted for a lot of other uses, such as phone mounts, dash cams, radars, etc.
It also could likely fit other kia models and years, I'm just not sure which, if you pop out the screw cover on the back and it visually matches the model, I'm sure it would fit.