Interchangeable Sanding Contours
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€5.04 – €6.16 net (excluding VAT)
For file: Sanding Contours Angles_0.4n_0.3mm_PLA_COREONE_3h44m.bgcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €5.60 excluding VAT (range midpoint).
- Weight reported by the author
- 109 g
- Print time reported by the author
- 3.73 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Interchangeable Sanding Contours with built in sandpaper storage and organization tray.
- Rating
- 5 / 5
- Likes
- 154
- Downloads
- 347
- Makes
- 1
- Views
- 1,731
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Interchangeable Contours – Multiple shapes and sizes to match any project
Built-In Sandpaper Storage in Handle – Swap contours/grits easily for seamless workflow.
Ideal for Woodworkers & DIYers – Perfect for furniture making, carving, and refinishing.
Recommend feeding sandpaper through the opening along the side of the handle to start then twist sandpaper from opening at bottom of handle.
(4) Handles Labeled:
- 150 grit, 180 grit, 220 grit, and 240 grit
(4) Angles:
- 90°, 60°, 45°, and 30°
(8) Convex Shapes:
- 1-1/4", 1", 3/4", 5/8", 1/2", 3/8", 1/4", and 1/8"
(8) Concave Shape:
- 1-1/4", 1", 3/4", 5/8", 1/2", 3/8", 1/4", and 1/8"
(1) Storage Base (Two Options)
241 mm diameter
195 mm diameter
Recommended Print Settings:
- 0.3 or 0.2 mm layer heights
- 3 wall loops
- Concave & Convex shapes 0.75" and higher at 30% infill
- 30% infill for remaining contour shapes and handles
Handles/Contours are 4" in height
Base is approximately 9.5" in diameter
P2P Code:
@cgaps_4045609