Replacement ear pads for Jabra PRO 930 - feels like leather
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
The ear pads on my headphones started to crumble, so I designed this replacement part.
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 10
- Makes
- 0
- Views
- 154
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Audio
- License
- Creative Commons — Attribution — Noncommercial
The ear cushions are only 0,5 mm thick in the area around the ear, and thanks to the foaming flexible filament used, the printed pad has a leather‑like feel. This makes it comfortable to wear even during long meetings or extended listening sessions.
The ear pad is printed in Colorfabb Varioshore at full foaming capacity. A segmented PLA ring with a 0.1 mm spacing supports the lower portion, while PETG organic supports handle the upper overhang. These supports are anchored on a thin PETG ring to ensure stable and consistent printing.
For removing the organic supports, it is recommended to do so while the ear pad remains attached to the build plate. This minimizes the risk of deformation, as the horizontal sections of the ear pad are only 0,5 mm thick.
Due to the complexity of the print and the detailed support configuration, I have included both the 3MF file and the G‑code. Since I also print with 0,6 mm nozzles on my machine, please remember to adjust Extruder 1 to a 0,4 mm nozzle if the Prusa XL is still using its default configuration.
For test printing, have a look to replacement earpads for Jabra Evolve 2 65.