Anycubic Kobra 3 Combo (V1) Fan Duct
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Fan duct made for replacement on the AnyCubic Kobra 3 Combo (V1)
- Rating
- 5 / 5
- Likes
- 14
- Downloads
- 90
- Makes
- 0
- Views
- 519
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Anycubic Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Recently I had a failure on my printer and had melted the original fan duct. Instead of waiting, I designed and printed my own. This duct is a three sided duct with placement of the original two exhaust ports along with two smaller ports near the back of the fan. The exhaust ducts are also smaller, providing faster moving, cold air for faster printing speeds. Upon testing I was able to print an overhang test and have a near perfect model. While this can be printed in PLA, PETG or ASA; I chose to print this in resin. Resin provided the detail and accuracy that I wanted. THIS IS A WORK IN PROGRESS. If you download the original model it will fit on the Anycubic Kobra 3 Combo (V1) but it is a very tight print, along with the lower fan stud not quite lining up perfectly. But, I digress and will say that this will work.
As always comments and feedback are very welcome.