1 / 3
40mm Challenge coin laser jig
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Jig for my laser engraver to hold a 40mm coin
- Rating
- 0 / 5
- Likes
- 8
- Downloads
- 39
- Makes
- 0
- Views
- 118
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial
This is a laser engraving jig for 40mm challenge coins.
Includes cut out for easier removal.
Gives a nice tight fit for the coin for me. Obviously there are a million different sources for these coins so I cannot guarantee your 40mm coin is the same as my 40mm coin ;)
My laser is a Commarker B4. The hole spacing is 25mm so if you have a different laser but the spacing is the same then this will mount correctly for you.
Holes are quite tight to start with but just run a screw through them a couple of times or bore them out to suit your needs