Razer Barracuda X and Xbox Controller Combo stand
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This model is used for keeping the Razer Barracuda X headphone and the Xbox controller displayed and stored on a stand
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 13
- Makes
- 0
- Views
- 130
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Credit to
and
for their models used in this model's creation.
OTHER HARDWARE NEEDED:
1x M3 (10mm) screw and a small pilot hole made by a drill using the speed mode for attaching the headphone holder.
Super Glue for connecting all the parts together, and when doing so, let it sit for a few minutes with around 10 lbs. of weight pushing it down.
Sandpaper ~220 grit for sanding of support interfaces on Headphone holder or anywhere else issues are caused
Print Settings:
For supports, use tree, as other styles use un-necessary filament.
For infill, use gyroid with 10% infill
Notes:
If needed, change the size of the joint module if your printer needs a slightly different size in order for the model to work.