1 / 3
Pālā — image 1
1 / 3

Pālā

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

A Hadley (metric) - mounted phone holder for AstroHopper-guided star hopping

Rating
0 / 5
Likes
1
Downloads
25
Makes
0
Views
174
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Share Alike

Introduction

Pālā (Pāḷi: guardian, keeper) is a 3D-printed phone holder designed for the Hadley (metric) telescope. It mounts directly onto the Hadley’s dual dovetail holder and securely holds a mobile phone for use with AstroHopper (links to my fork of the original) and other manual star-hopping or telescope alignment apps.

I could not find an existing phone mount that fit the Hadley metric dovetail properly, so this model was designed from scratch to provide a rigid, vibration-free mounting solution. Pālā keeps the phone aligned with the telescope, allowing smooth sky navigation by physically moving the telescope rather than relying on electronics or motors.

The design uses standard metric hardware, much of which is commonly left over from a Hadley metric build. Screenshots of the assembled model and recommended print orientations are included.

Printing Instructions

  • Layer height: 0.2 mm

  • Material: PETG recommended (PLA should also work)

  • Walls: 3

  • Infill: 20% or higher

  • Supports: Not required

BOM

Part

Quantity

M4x50 Hex Bolt

1

M4x12 SHCS Screw

2

M4 Nut

3

Assembly

Note: The video does not show the knob.stl on the M4x50 hex bolt, but it should be obvious how it fits.

Tags