1 / 2
JYSK curtain rod endcap
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Simple curtain rod end cab.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 4
- Makes
- 0
- Views
- 27
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Bedroom
- License
- Creative Commons — Attribution — Share Alike
This curtain rod endcap is for JYSK or similar rods. We lost one endcap in moving so I printed a one. This is printed in two pieces and glued together with superglue. I printed it with gray ABS. but PETG would do also. PLA I do not recommend but it works too I guess. No support needed. 20% infill 3 perimeters with 0.4 mm nozzle with 0.2 layer height. 4-5 top and bottom layers for nice surfaces. Print flat side down. In the picture left one is original - right the glued ready made print.