1 / 2
RAK Unify Enclosure SolarXiao Mounting Plate
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a simple mounting plate for a SolarXiao inside a Rak Wireless Unify Enclosure.
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 37
- Makes
- 0
- Views
- 477
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Share Alike
This is a mounting plate for a SolarXiao inside a Rak Unify 150x100x45 Enclosure. The PCB mounts to the plate with M2.5 x 5mm screws and the plate mounts flush to the enclosure standoffs with M3x5mm screws. The area underneath the mounting plate will accept up to a 6.5mm thick battery, but larger batteries like an 8000mAh 126090 LiPo flat cell can be used with longer mounting screw. The relief cut at the bottom is clearance for a flush mount waterproof USB-C cable.
Print in PETG or ASA if using in an outdoor enclosure.