Diesel Injection Pump Plunger and Barrel
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This ist a model of a Plunger and Barrel of an inline diesel injection Pump.
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 41
- Makes
- 0
- Views
- 491
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Engineering
- License
- Creative Commons — Attribution
This is a shortened Barrel and Plunger for an inline Diesel injection Pump. The Barrel is stationary and the Plunger can be rotated to adjust the injected amount of fuel.
This is - of course - non functional. The dimensions are copied off of an actual Barrel and Plunger … except for the tolarances. If you print it in 100% size, the play will be 0.1mm which is too tight for most printers. I would recommend printing it at 200% to make the play 0.2mm and use two different colors to indicate the moving and stationary part.
Enjoy.
Of course there are Plungers with two camfeded edges to control the injection timing, but this is the most common style of Plunger.