Tool Box Parametric - Prusa Mini Printable Remix
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Tool box remixed to be printable on Prusa Mini while maintaining M3 mounting hardware.
- Rating
- 4.737 / 5
- Likes
- 314
- Downloads
- 1,641
- Makes
- 22
- Views
- 9,606
- Reviews
- 19
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution — Noncommercial
This is a remix of the Tool Box Parametric by Yanev, scaled and modified to be printed on a Prusa Mini. The key changes are:
- Scaled down to fit on Prusa Mini printbed
- All hardware mounts modified so that M3 sized bolts can still be used despite the scaling
- 1.75mm filament can still be used (if you want) for the box gasket
6 M3 x 25 bolts are required for the hinges and latches. Increase the size to M3 x 28 if you'd like to add a nut to the end of each, but the holes are sized to let the bolts screw into the material and hold firmly without nuts.
A full set of internal dividers, as shown in the pictures, can be found here.
Print settings used in sample photos
Prusament Mango Yellow and Galaxy Black PETG
100% rectilinear infill
0.15mm layer height
No supports
PLA, lower infill and higher layer heights should work fine too.
Hope this is useful for the Prusa Mini owners out there.