DIY Pi400
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I had a spare RPI4B laying around so decided to make a "Pi400"
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 10
- Makes
- 0
- Views
- 164
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution
I had to trim off some of the plastic around the network connectors to make it fit.
The top part was glued to the main chassis.
These are the parts I used:
Short Network cable: https://www.aliexpress.com/item/1005007321274754.html
USB-C socket: https://www.aliexpress.com/item/1005009592164491.html
Short USB-C cable: https://www.aliexpress.com/item/1005009712465370.html
Micro HDMI connector (D1): https://www.aliexpress.com/item/1005006437300837.html
Standard HDMI Connector (A4): https://www.aliexpress.com/item/1005006437300837.html
20cm FFC cable: https://www.aliexpress.com/item/1005006437300837.html
4 Port USB-A Hub: https://www.aliexpress.com/item/1005005551666282.html
46cm SD-card extension: (I had this from another project, it can be shorter) https://www.aliexpress.com/item/1005005968667303.html
5V Fan: https://thepihut.com/products/software-controllable-5v-30mm-fan-for-raspberry-pi
USB Keyboard: https://www.ebay.co.uk/itm/13670113014