DIY Pi400
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I had a spare RPI4B laying around so decided to make a "Pi400"
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 10
- Wydruki
- 0
- Wyświetlenia
- 164
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution
I had to trim off some of the plastic around the network connectors to make it fit.
The top part was glued to the main chassis.
These are the parts I used:
Short Network cable: https://www.aliexpress.com/item/1005007321274754.html
USB-C socket: https://www.aliexpress.com/item/1005009592164491.html
Short USB-C cable: https://www.aliexpress.com/item/1005009712465370.html
Micro HDMI connector (D1): https://www.aliexpress.com/item/1005006437300837.html
Standard HDMI Connector (A4): https://www.aliexpress.com/item/1005006437300837.html
20cm FFC cable: https://www.aliexpress.com/item/1005006437300837.html
4 Port USB-A Hub: https://www.aliexpress.com/item/1005005551666282.html
46cm SD-card extension: (I had this from another project, it can be shorter) https://www.aliexpress.com/item/1005005968667303.html
5V Fan: https://thepihut.com/products/software-controllable-5v-30mm-fan-for-raspberry-pi
USB Keyboard: https://www.ebay.co.uk/itm/13670113014