1 / 2
Simple band/belt shuttle for Inkle or tablet weaving
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a lightweight band/belt shuttle designed for Inkle/Tablet weaving. The shuttle has a bevelled edge for beating.
- Rating
- 0 / 5
- Likes
- 16
- Downloads
- 97
- Makes
- 0
- Views
- 249
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution — Noncommercial
This is a simple, lightweight band/belt shuttle designed for Inkle/Tablet weaving. The shuttle has a bevelled edge for beating the weft into place. The shuttle is 125mm in length and is 7mm at its thickest edge.
I printed this on my Bambu P1P printer using eSun PLA+ with the following settings:
0.2 layer height
20% infill
If you want it stronger, then you could print it at 100% infill, but I found that 25% works for me. Let me know if there is any modifications I should do.