1 / 4
Core One + Dry box Desiccant Shelf, Shortened for 100g Desiccant and Mount for Humidity Meter Added
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I shortened so it fits a 100g Desiccant bag and is away from the PTFE tube. I added a mount for a small humidity meter.
- Rating
- 5 / 5
- Likes
- 5
- Downloads
- 14
- Makes
- 1
- Views
- 244
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial
I printed with PETG and .2 layers. Almost anything will work as most of the design has only small overhangs. Supports are necessary on the meter support part. I used paint on organic supports that were pretty easy to remove if you cut the bases off first. The magnets were attached with JB Weld Plastic Epoxy. Only cover about the middle 1/2 of the width of the magnet as it oozes out when clamped to let it dry.
This is designed to be used with
and