Designer wall mount for storing and displaying skis and ski poles with logo/nameplate
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Designer wall mount for storing/displaying skis and ski poles, consisting of a hanger, locking plate and logo/name plate
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 20
- Makes
- 0
- Views
- 143
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Winter Sports
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Designer wall mount hanger for storing/displaying alpine skis and ski poles
with a locking plate (click in on the hanger) to secure the skis and poles
and a logo/name plate (click in on the locking plate)
mountable with two 5x120mm countersunk screws, which are also stabilizing the hanger.
easy to print, no supports needed
A matching model for cross-country skis and poles is available here.
There is a blanc name plate where you can add a text or a logo with the slicer and preconfigured logo plates for Fischer, Head, Kästle, Rossignol, Salomon
Ski and Pole dimensions:
Ski pair maximum thickness 14mm
Ski width on the hanging point maximum 120mm
Ski pole diameter maximum 18mm
Printing instructions
for best results do not change the orientation of the parts
PETG recommended (PLA may work also, but is more brittle)
0.4 nozzle
0.2mm Structural
3 Perimeters
15% infill Gyroid
no supports needed
Hanger usage:
connect both skis using the ski brakes mounted on the bindings.
place the ski pair in the holder with the narrowest part under the ski tips.
place the ski poles into the recesses left and right at the holder
push the locking plate on the holder
add a name/logo plate to the locking plate if desired
 |  |  |
|---|