Fahrrad-Wandhalter Wandhalterung Variabel / Bicycle Wall Mount Roadbike Gravelbike
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Wandhalterung für Rennräder und Gravelbikes mit 700er Bereifung. Auf zwei verschiedene Arten nutzbar
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 16
- Makes
- 0
- Views
- 418
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution — Noncommercial
Aufgrund von Platzmangel im Abstellraum habe ich eine Wandhalterung für Fahrräder konstruiert.
Meine Version ist speziell für 25 mm Stäbe ausgelegt.
In meinem Aufbau habe ich einen 25 mm Buchenholzstab verwendet. Eiche oder andere Harthölzer sind ebenfalls geeignet.
Die Halterung kann auf zwei Arten genutzt werden:
Variante 1: Zwei Wandhalterungen + zwei Stäbe zum Aufhängen des Fahrradrahmens
Variante 2 (mein Aufbau): Zwei Reifenauflagen + eine Wandhalterung mit Endkappe, um das Fahrrad zusätzlich am Lenker zu fixieren
Belastungstests:
Wandhalterung mit 400 mm langem, 25 mm Buchenstab: 10 kg getestet – gehalten
Jede Reifenauflage: 10 kg getestet – gehalten
Damit sind bei doppelter Aufhängung 20 kg Gesamtgewicht aus meiner Erfahrung problemlos möglich – unabhängig davon, ob mit oder ohne Reifenauflagen.
Hinweis:
Keine Haftung oder Garantie. Jeder sollte die Halterung vor der Nutzung selbst testen.
Druckeinstellungen:
Drucker: P1S
Material: Bambu Lab ABS (schwarz)
Bambulab Profil: Strength 0.2 mm
5 obere und untere Schichten
6 Wandlinien
30% Gyroid Füllung
Automatische Baum Stützstruktur (nur Endkappe)
Benötigtes Material:
25 mm Hartholzstab (Länge nach Bedarf)
Pro Wandhalterung:
1× 6 mm Dübel
1× Schraube 4–5 × 50–60 mm (Wand)
2× Holzschrauben 3 × 25–35 mm (Holzstab)
Pro Reifenauflage:
2× 6 mm Dübel
2× Schrauben 4–5 × 50–60 mm
Pro Endkappe:
1× Holzschraube 3 × 25–35 mm
--------------------------------------------------------------------------------------------------------------------------------
Due to lack of space in the storage room, I designed a wall mount for bicycles.
My version is specifically designed for 25 mm rods.
In my design, I used a 25 mm beech wood rod. Oak or other hardwoods are also suitable.
The mount can be used in two ways:
Option 1: Two wall mounts + two rods for hanging the bicycle frame
Option 2 (my setup): Two tire supports + one wall mount with end cap to additionally secure the bike by the handlebars
Load tests:
Wall mount with 400 mm long, 25 mm beech rod: 10 kg tested – held
Each tire support: 10 kg tested – held
In my experience, this means that with double suspension, a total weight of 20 kg is possible – regardless of whether tire supports are used or not.
Note:
No liability or guarantee. Everyone should test the mount themselves before use.
Print settings:
Printer: P1S
Material: Bambu Lab ABS (black)
Bambulab profile: Strength 0.2 mm
5 Top and bottom layers
6 walllines
30% Gyroid Infill
Automatic tree support structure (end cap only)
Required materials:
25 mm hardwood rod (length as required)
Per wall mount:
1× 6 mm dowel
1× screw 4–5 × 50–60 mm (wall)
2× wood screws 3 × 25–35 mm (wooden rod)
Per tire mount:
2× 6 mm dowels
2× screws
Per end cap:
1× wood screw 3 × 25–35 mm