1 / 11
Silica arc ring cylinder (HSM952 Filament box) — image 1
1 / 11

Silica arc ring cylinder (HSM952 Filament box)

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Silica arc ring cylinder for desiccant, hygrometer and label. Fits with 1kg filament spool into round box (e.g. HSM952).

Rating
5 / 5
Likes
9
Downloads
45
Makes
1
Views
330
Reviews
1

Updated at source:

Model information

Category
Accessories
License
Standard Digital File License

When searching for a dry storage solution for my filament spools I've found some round food boxes sized for 1kg spools -- quite good fit as filament box.

Then I've found models for silica containers that can be placed in the inner core of the spool. Some of them were able to hold a cheap digital hygrometer. But this didn't work well for me. Hygrometer would show "min" value (10%) quickly while another hygrometer in the outer ring of the spool showed a much higher value. Problem is probably that the silica container is very close the hygrometer and that the spool itself is between filament and the container in the center.

My approach for the model here was to put the silica container with hygrometer in the outer space of the round box. I added a label field. The silica arc ring cylinder is 120°, label field is about 85mm long.

Printed with PLA with 0.25mm without supports.

Filament boxes I used can be found using HSM952 as keyword. They are good quality, perfect fit, but not cheap.
Cheap digital Hygrometer can be found online easily, diameter is around 45mm (outside) resp. 41mm (core).

UPDATE: You might want to have a look at another solution for HSM952 boxes: https://www.printables.com/model/474932-filamentbox-lock-lock-hsm952

UPDATE 2: There is now another version with a small window between hygrometer and label/silica box so you can see the filament color more easily.

If you find this useful, please add a "like", add a comment or add a photo of your make.
---

Bei der Suche nach einer trockenen Aufbewahrungslösung für meine Filamentrollen habe ich für 1kg-Rollen passende runde Aufbewahrungsdosen gefunden -- ziemlich gut passend als Filamentboxen.

Dann habe ich 3D-Modelle von Trockenmittel-Containern gefunden, die man im Inneren der Rolle deponieren kann. Einige davon hatten Platz für ein billiges digitales Hygrometer. Aber das hat bei mir nicht gut funktioniert. Das Hygrometer hat sehr schnell den minimalen Wert (10%) angezeigt, während ein anderes Hygrometer im Außenbereich der Box einen viel höheren Wert zeigte. Das Problem ist offenbar, dass der Silica-Container zu nah am Hygrometer sitzt und dass die Rolle selbst zwischen Filament in dem Silica-Container ist und den Luftaustausch behindert.

Mein Ansatz für dieses Modell hier war, den Silica-Container mit Hygrometer im Außenbereich der Box unterzubringen, um beides etwas zu verbessern. Ich habe ein Beschriftungsfeld hinzugefügt. Das Ringzylindersegment hat einen Winkel von 120°, das Beschriftungsfeld ist ca. 85mm lang.

Gedruckt mit PLA mit 0,25mm ohne Support.

Die Filament-Aufbewahrungsboxen, die ich genommen habe, findet man mit Suchwort HSM952. Die sind qualitativ gut, haben die perfekten Maße, aber leider nicht besonders günstig.

Die günstigen Digital-Hygrometer findet man leicht überall. Durchmesser 45mm außen, 41mm im Kernbereich (Bohrung).

UPDATE: Hier gibt es eine weitere Lösung für HSM952 -Boxen: https://www.printables.com/model/474932-filamentbox-lock-lock-hsm952

UPDATE: Es gibt jetzt eine weitere Version für den Container mit einem kleinen Sichtfenster zwischen Hygrometer und Beschriftungsfeld/Trockenmittel.

Ich freue mich über "Likes", Fotos von "Makes" oder auf Kommentare.

Tags