Minimalist Case for Huawei Pura 70 with Interchangeable Camera Ring | Case minimalista para Huawei Pura 70 con anillo de cámara intercambiable
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Case minimalista Huawei Pura 70 con anillo de color. Minimalist phone case for Huawei Pura 70 with a color camera ring
- Rating
- 5 / 5
- Likes
- 2
- Downloads
- 47
- Makes
- 1
- Views
- 184
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other Gadgets
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
EN ---
This model is a phone case specifically designed for the Huawei Pura 70 (standard version, not Pro or Ultra). The design is minimalist and functional, focused on protecting the device without adding unnecessary bulk.
The case consists of two parts: the main body and the camera ring. The ring is designed to be printed in a different color or material and must be attached to the main case using super glue or a similar adhesive to ensure a secure and durable bond.
The model has been tested printed in PLA for approximately two months with no issues during daily use. The corners are reinforced with additional thickness to provide better protection against drops or minor impacts.
At the bottom, the case includes a large opening for the charging port, allowing easy cable access and providing slight plastic flex to help remove the phone from the case more easily. A dedicated speaker opening is also included at the bottom.
If the case and camera ring are printed together as a single multicolor print without adhesive, supports will be required. When printing the parts separately and assembling them with adhesive, supports are not needed.
Printing Recommendations
Recommended material: PLA
Layer height: 0.2 mm
Infill: 15–25%
Perimeters: 3 or more
Supports:
Not required when printing parts separately and gluing them
Required when printing as a single multicolor piece
Orientation: Print parts in the original file orientation
Recommended adhesive: Super glue (cyanoacrylate) or equivalent
ESP --- Ñ
Este modelo es un case diseñado específicamente para el Huawei Pura 70 (versión estándar, no Pro ni Ultra). El diseño es minimalista y funcional, pensado para proteger el dispositivo sin agregar volumen innecesario.
El case está compuesto por dos partes: el cuerpo principal y el anillo de las cámaras. El anillo está diseñado para poder imprimirse en un color o material diferente y debe adherirse al cuerpo del case utilizando super glue o un adhesivo similar para lograr una unión firme y duradera.
El modelo ha sido probado impreso en PLA durante aproximadamente dos meses sin presentar problemas de uso. Las esquinas cuentan con un mayor grosor para ofrecer una mejor protección ante caídas o golpes leves.
En la parte inferior incluye un orificio amplio para el cargador, lo que facilita la conexión del cable y permite una ligera flexión del plástico para poder retirar el celular del case con mayor facilidad. También cuenta con una abertura dedicada para la salida del parlante.
Si se desea imprimir el case y el anillo de cámara como una sola pieza en multicolor y sin usar adhesivo, es posible, pero será necesario el uso de soportes. Al imprimir las piezas por separado y unirlas con pegante, no se requieren soportes.
Recomendaciones de impresión
Material recomendado: PLA
Altura de capa: 0.2 mm
Infill: 15–25%
Perímetros: 3 o más
Soportes:
No requeridos si se imprimen las piezas por separado y se unen con adhesivo
Requeridos si se imprime como una sola pieza en multicolor
Orientación: Imprimir las piezas en la orientación original del archivo
Adhesivo recomendado: Super glue (cianoacrilato) o equivalente
Gracias por descargar :D
