1 / 2
Hakko FH-300 to Pinecil V2 Adapter - With Hall Effect Magnet
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Adapter to fit the Pinecil V2 soldering iron correctly in the Hakko FH-300
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 13
- Makes
- 0
- Views
- 77
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial
The Pinecil V2 rests loosely in the FH300, despite it being recommended on the Pinecil wiki. This adapter tightens up the fit and adds a magnet to activate the Pinecil V2's hall effect sensor, which detects it beautifully. I used a spare N52 6x3 magnet I had from working on Vorons. Secure it with superglue.