1 / 2
Hakko FH-300 to Pinecil V2 Adapter - With Hall Effect Magnet
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Adapter to fit the Pinecil V2 soldering iron correctly in the Hakko FH-300
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 13
- Wydruki
- 0
- Wyświetlenia
- 77
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
The Pinecil V2 rests loosely in the FH300, despite it being recommended on the Pinecil wiki. This adapter tightens up the fit and adds a magnet to activate the Pinecil V2's hall effect sensor, which detects it beautifully. I used a spare N52 6x3 magnet I had from working on Vorons. Secure it with superglue.