1 / 2
MiBoxer LC2-ZR Wall/Ceiling Mount
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Wall mount for MiBoxer LC2-ZR. MiBoxer LC2-ZR wall/ceiling mount mounts to the wall/ceiling with 2 M4 screws.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 14
- Makes
- 0
- Views
- 61
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This mount is for the MiBoxer LC2-ZR2 2 Wires 2 in 1 LED controller.
It mounts to the wall or ceiling with 2 M3 screws.
The MiBoxer is a tight fit in the mount, so it can be mounted in any direction you want.
There are cut-outs for the LED and push button, if you mount it "right-side-up", but it can also be mounted the other way around if that is more convenient in your use case.
It can be printed without supports, if printed in the imported position and takes about 30-45 minutes to print.