Nendoroid/Figma Adapter Mount for IKEA Skadis
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.17 – €0.20 net (excluding VAT)
For file: Skadis_Circular_Nendo_Mount_0.2mm_PLA_MINI_15m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.19 excluding VAT (range midpoint).
- Weight reported by the author
- 1 g
- Print time reported by the author
- 15 min
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
A connector for the IKEA Skadis pegboard for mounting Nendoroids and Figmas.
- Rating
- 0 / 5
- Likes
- 56
- Downloads
- 203
- Makes
- 1
- Views
- 2,869
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Action Figures & Statues
- License
- Creative Commons — Attribution — Noncommercial
Two models are available:
- Square Adapter Mount (Recommended) - Easier to print and does not require any supports.
- Circular Adapter Mount - Looks better but requires requires additional supports.
Printing Instructions
Note that depending on your slicer, changing the orientation of the prints can alter the size of the hole slightly. The square mount was created with a 4mm diameter hole while the circular mount was created with a 4.1mm diameter hole to account for the expected print orientation.
If you're having issues with fitting in the nendo/figma stands in to the hole, let me know and I'll see if I can put different versions.
Square Adapter Mount
Just print as is, no supports needed. Print in the same position as in the gcode to get maximum strength for the joint. Printed at 0.2mm layer height with 15% infill. Increase infill if you want more strength.
Circular Adapter Mount
Printed at 0.2mm layer height. I recommend the infill to be set to 100% to increase strength of the joint. Add supports as needed.