1 / 5
C8 Corvette Underbody Deflector v2.0
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Updated model of underbody deflector for C8 corvettes.
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 107
- Makes
- 1
- Views
- 293
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is my updated version of the Underbody Deflector for the C8 Corvettes. Set the infill to 75% to 80% for stiffer ears and used tree supports.
Removed the cross section and fins to allow more air flow. Hope this helps some of you.
Printed with AD5M PETG. Approx 9 hrs to print each side.
Photos show comparison to Amazon purchased aluminum deflector. The mounting tabs on the aluminum deflectors need to be adjusted for correct fit.
Feedback in comments is requested.