Joycon 2 charging grip adapter for split protective cases
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.89 – €1.09 net (excluding VAT)
For file: Joycon+2+Grip+Mod+flat buttons_0.4n_0.2mm_PLA_MK4ISMMU3_50m.bgcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.99 excluding VAT (range midpoint).
- Weight reported by the author
- 16 g
- Print time reported by the author
- 49.2 min
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Adapter to use a split protective case, and still be able to use the charging grip and buttons.
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 5
- Makes
- 0
- Views
- 313
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Video Games
- License
- Creative Commons — Attribution — Noncommercial
I love having my JSAUX split protective case, but still wanted to use the charging grip due to the grip buttons. Though I did not want to keep taking the joycons out of the shell each time.
Parts used from joycon grip:
All the screws from the grip
Buttons attached to ribbon cable
Rubber button covers from inside
Other hardware needed:
Double sided tape (I used scotch double sided tape)
Prep:
Disassemble the joycon grip.
You will need to remove the buttons attached to the ribbon cable from their mount in the grip. I used a knife to carefully get under the sticker and pry it off.
Assembly (as seen in pictures):
Attach base using the screws from inside the grip
Attach the ribbon cable through the center. Then give it a small gentile twist to manage the cable better. Do not fold the ribbon cable as it can damage it.
Attach one button pad to each side of the risen platform. You may need to use double sided tape if they don't stick well.
Add a small strip of double sided tape, and then attach the rubber button covers. Make sure the placement is correct to click the button easily.
Put on the lid and attach it with the screws from the outside of the grip.