Post Bed Sewing Machine Flat Bed Table Attachment Magnetic Risers
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
These risers attached to a 1/4" (6mm+) table attachment create a flat bed for a post bed industrial sewing machine
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 6
- Makes
- 0
- Views
- 197
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial
Risers to make most 6" post bed industrial sewing machines into a flat bed sewing machine. A pair of Magswitch 150 switchable magnets press fit into the risers. I added brass inserts for the magnets and for the flat table to screw to the risers. Install or remove the table in seconds with the turn of the magnetic switches.
Risers are 6-1/8" tall by 11" long and 1-1/2" wide at the base. The phenolic table plate can be made from MDF, plywood, or metal instead, just needs to be 1/4" thick for the sizing to work. Otherwise increase the height or cut it lower in your slicer to suit your needs.
I have a Pfaff 195 machine, but most 6" post bed machines are similar.
Printed in PLA with 3 walls and 15% infill, 8x 4mm brass inserts and screws.