iCare HOME2 Eye Pressure Monitor Probe Cap
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
The probe can't touch anything, but is also relatively expensive. This makes it less dicey to remove from the case.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 6
- Makes
- 0
- Views
- 41
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Home Medical Tools
- License
- Creative Commons — Attribution
Technically you're supposed to switch out the probe after each use, but $1 per usage at multiple times a day gets expensive! Apparently, practically speaking, you can use one for like a week. This fits over the end of the device and guards the probe from brushing up against things. It should fit snugly enough to stay on.
Prints without supports or brim if you print slowly / at a small layer height with the small end on the build plate. I used a 0.6 mm nozzle but I expect it'll be okay with 0.4 mm as well. Fusion 360 source included.