1 / 3
iCare HOME2 Eye Pressure Monitor Probe Cap — zdjęcie 1
1 / 3

iCare HOME2 Eye Pressure Monitor Probe Cap

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

The probe can't touch anything, but is also relatively expensive. This makes it less dicey to remove from the case.

Ocena
0 / 5
Polubienia
0
Pobrania
6
Wydruki
0
Wyświetlenia
42
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution

Technically you're supposed to switch out the probe after each use, but $1 per usage at multiple times a day gets expensive! Apparently, practically speaking, you can use one for like a week. This fits over the end of the device and guards the probe from brushing up against things. It should fit snugly enough to stay on.

Prints without supports or brim if you print slowly / at a small layer height with the small end on the build plate. I used a 0.6 mm nozzle but I expect it'll be okay with 0.4 mm as well. Fusion 360 source included.

Tagi