1 / 5
Prusa Mini Top-Mounted Spool Holder (Z Axis NEMA 17 Motor Mount) — image 1
1 / 5

Prusa Mini Top-Mounted Spool Holder (Z Axis NEMA 17 Motor Mount)

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Spool holder for the Prusa Mini that sits overhead the mini, good if you have a lot of overhead space

Rating
0 / 5
Likes
2
Downloads
10
Makes
1
Views
94
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution

This is a remake of a model I found a long time ago on GrabCAD. 

Print settings: 100% infill, regular PLA or PLA+ is enough 

Instructions:

1) Take Rod for 608z and Bracket >>>
2) Insert two 608z bearings that came with your filament roller. One bearing on each side. >>>
3) Insert the 20 mm rods, one on each side. This is a press-fit design, so you may have to use some force or a soft hammer. >>>
4) Install the bracket on each side. This is a press-fit design, so you may have to use some force or a soft hammer.
5) Install the Body onto the motor, and insert your spool onto the Rod for 608z and Bracket.

Tags