1 / 5
Prusa Mini Top-Mounted Spool Holder (Z Axis NEMA 17 Motor Mount) — zdjęcie 1
1 / 5

Prusa Mini Top-Mounted Spool Holder (Z Axis NEMA 17 Motor Mount)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Spool holder for the Prusa Mini that sits overhead the mini, good if you have a lot of overhead space

Ocena
0 / 5
Polubienia
2
Pobrania
10
Wydruki
1
Wyświetlenia
94
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution

This is a remake of a model I found a long time ago on GrabCAD. 

Print settings: 100% infill, regular PLA or PLA+ is enough 

Instructions:

1) Take Rod for 608z and Bracket >>>
2) Insert two 608z bearings that came with your filament roller. One bearing on each side. >>>
3) Insert the 20 mm rods, one on each side. This is a press-fit design, so you may have to use some force or a soft hammer. >>>
4) Install the bracket on each side. This is a press-fit design, so you may have to use some force or a soft hammer.
5) Install the Body onto the motor, and insert your spool onto the Rod for 608z and Bracket.

Tagi