Mineral Vase
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€1.92 – €2.35 net (excluding VAT)
For file: This is the 0.24mm layer height version (0.08mm included normally) / mineral-vase_024mm_pla_mk2s_2h36m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €2.13 excluding VAT (range midpoint).
- Weight reported by the author
- 17 g
- Print time reported by the author
- 2.6 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Hi all, this is a vase I made to look similar to, or at least evoke, a Quartz crystal.
- Rating
- 0 / 5
- Likes
- 13
- Downloads
- 88
- Makes
- 1
- Views
- 622
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Sculptures
- License
- Creative Commons — Attribution
Hi all, this is a vase I made to look similar to, or at least evoke, a Quartz crystal. What really make this vase interesting to me is that it manipulates the FDM process to produce effects. At 0.24mm and higher, the top layers of the "nubs" (those protuberances on the side that remind me of a crystal) separate from each other and droop down. I love that effect. At approximately 0.12mm (depending on printer) and lower, those droops disappear, leaving a completely unified surface. This vase is well worth the print. I've included gcode for 0.24mm in the user print files and 0.08mm is included under the main section.
Thank you for printing!
Print instructions
Category: Sculptures