Pinda Pro - Sensor Calibration Tool
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a tool used to adjust your Pinda to 1.5mm above the stock E3D V6 Nozzle tip.
- Rating
- 5 / 5
- Likes
- 4
- Downloads
- 16
- Makes
- 2
- Views
- 61
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a tool used to adjust your Pinda bed leveling sensor to 1.5mm above the stock E3D V6 Nozzle tip on the Prusa MK3.
The Pinda V2 has a 2mm sense distance. That half a millimeter makes sure that it's not going to crash into the bed unless the sensor is faulty.
E3D changed their Nozzle specs in November so this is a test.
Don't print this in a dark color and expect to see anything.
Print Settings
Printer brand:
Prusa
Printer:
i3 MK3
Resolution:
.2
Infill:
15
Filament brand:
Any
Filament color:
Any
Filament material:
PLA/PETG
Notes:
This is a tool used to adjust your Pinda to 1.5mm above the E3D V6 Nozzle tip.