1 / 3
Ikea Gullaberg Shoe cabinet door dowel stop — image 1
1 / 3

Ikea Gullaberg Shoe cabinet door dowel stop

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

cabinet door swing stop dowel. Elegoo PLA, .16mm LH, 25% infill 2 WL 60*c plate. It's pretty forgiving.

Rating
0 / 5
Likes
0
Downloads
20
Makes
0
Views
58
Reviews
0

Updated at source:

Model information

Category
Living Room
License
Creative Commons — Attribution

After breaking everyone of these dowel stops I decided to try designing my first 3d Part. PLA, .16mm LH, 25% infill 2 WL Supports enabled.

I drop tested the dowel stops with a full bin of shoes and it didn't even budge.  I made them about a .5mm larger than the factory pieces.  A quick spray of water on the inside of the unpainted mdf will cause slight swelling allowing you to press in the dowels.  They will not fit into the hole without pressure.  Being loose is probably what caused the factory plastic to break.  I don't know how to add fillets yet so feel free to add them if you think it's needed.

Tags