Ikea Gullaberg Shoe cabinet door dowel stop
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
cabinet door swing stop dowel. Elegoo PLA, .16mm LH, 25% infill 2 WL 60*c plate. It's pretty forgiving.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 20
- Wydruki
- 0
- Wyświetlenia
- 58
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Living Room
- Licencja
- Creative Commons — Attribution
After breaking everyone of these dowel stops I decided to try designing my first 3d Part. PLA, .16mm LH, 25% infill 2 WL Supports enabled.
I drop tested the dowel stops with a full bin of shoes and it didn't even budge. I made them about a .5mm larger than the factory pieces. A quick spray of water on the inside of the unpainted mdf will cause slight swelling allowing you to press in the dowels. They will not fit into the hole without pressure. Being loose is probably what caused the factory plastic to break. I don't know how to add fillets yet so feel free to add them if you think it's needed.