1 / 4
1.5" Roll Cage Tube Mount For Baofeng TP5 — image 1
1 / 4

1.5" Roll Cage Tube Mount For Baofeng TP5

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Mount your radio for race communications

Rating
0 / 5
Likes
3
Downloads
19
Makes
0
Views
89
Reviews
0

Updated at source:

Model information

Category
Automotive
License
Creative Commons — Attribution — Noncommercial — Share Alike

Mount for Baofeng TP5 radio on a roll cage for racing communications.  Allows access to all buttons and the connector on the side.   Requires that the belt clip be installed, and you'll need to cut a piece of foam to sit in the bottom of the mount.  The stuff I used was about 1.75" thick.  You could probably use other stuff to serve the same purpose as long as the radio gets pushed up firmly against the belt clip.  I haven't actually used this in a race yet so can't provide experience there but it feels pretty snug.

I don't have the more common UV-5R to test, but that radio might also work with this mount, I think they are fairly similar size but no promises.  If there's a modification I can make to allow that to work, let me know happy to make a UV-5R version also if it doesn't fit.  I've included a test file that's smaller than the full mount (no roll cage attachment) if you want to test your radio fitup without wasting a lot of filament.

I used these heat set inserts (the M6 size), although you could also just drill it out and use a nut instead:

https://a.co/d/c4PAkFG

These are the screws I happened to have around but there's nothing special about them, use what you have:

https://a.co/d/biPAU3k