1 / 8
QIDI Q2 Lightbar Set (Top+Side)
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
There is a model for 8mm LED stripe, to mount it as an additional illumination.
- Rating
- 4.5 / 5
- Likes
- 38
- Downloads
- 161
- Makes
- 3
- Views
- 914
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Printer: QIDI Q2, LED strip width: 8 mm.
Updated design of mounts for an LED strip.
For proper operation, the original LED strip must be replaced with any available one. It is important that the strip is rated for 24 V.
Print with supports; the required supports are shown in the slides. I used PETG filament, as the temperature inside the chamber is usually no higher than 60°C.