1 / 5
Prusa Core One - Compact Community build MMU3 - Vent with embeded mesh filter — image 1
1 / 5

Prusa Core One - Compact Community build MMU3 - Vent with embeded mesh filter

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Vent and filter for Core One Compact Community build MMU3

Rating
0 / 5
Likes
6
Downloads
13
Makes
1
Views
275
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial — Share Alike

Description

I have a Sheltie (Shetland Sheepdog) with incredibly fine hair that she enthusiastically sheds. Unfortunately, that hair has a habit of drifting into the print chamber and occasionally getting fused into my prints.

After installing the MMU3 using the excellent Community MMU3 remix, I decided to remix the vent as well, adding a much-needed mesh to help catch stray hairs before they can enter the printer.

Instead of using the typical multi-color approach, I went a different route and designed a pocket that allows a separately printed mesh to be embedded directly into the vent during the print.


Printing Instructions

Mesh - Prusament Galaxy Black PETG

  • Print first

  • 3 perimeters

  • 35% honeycomb infill

  • 0 top layers

  • 0 bottom layers

  • 0.15 mm layer height

💡 Tip: Let the mesh cool completely before removing it from the build plate to prevent warping.

Vent - Prusament Orange PETG

  • Print the two-part vent

  • 3 perimeters

  • 15% grid infill

  • 0.15 mm layer height

  • Pause after layer 9

Start the vent print and allow the printer to pause after layer 9. Insert the mesh grille into the printed pockets, then resume the print. The mesh will be fully encapsulated inside the vent.

Tags