1 / 4
Anycubic Wash & Cure 3 low profile lid
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Low profile lid for the wash station to fit inside Ikea Kallax.
- Rating
- 3 / 5
- Likes
- 3
- Downloads
- 26
- Makes
- 0
- Views
- 98
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Anycubic Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I tried to fit the original one in my Kallax, did not fit, and I do not plan on stacking 2 beds in the wash station.
Hence, this low profile version with hinged latches that snap nicely.
Required hardware:
8 * M3x40mm (I used cap-head) for the latches
1 * M4x10mm for the top knob
The model re-uses the original seal from the lid.
You could try modelling a TPU gasket instead, the cross section of it is a 4x4mm square, use the STP file to get the profile for it.